GaAs-based Self-Aligned Stripe Superluminescent Diodes Processed Normal to the Cleaved Facet

We demonstrate GaAs-based superluminescent diodes (SLDs) incorporating a window-like back facet in a self-aligned stripe. SLDs are realised with low spectral modulation depth (SMD) at high power spectral density, without application of anti-reflection coatings. Such application of a window-like facet reduces effective facet reflectivity in a broadband manner. We demonstrate 30mW output power in a narrow bandwidth with only 5% SMD, outline the design criteria for high power and low SMD, and describe the deviation from a linear dependence of SMD on output power as a result of Joule heating in SLDs under continuous wave current injection. Furthermore, SLDs processed normal to the facet demonstrate output powers as high as 20mW, offering improvements in beam quality, ease of packaging and use of real estate. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only

Arthroplasty of a Charcot knee

The Charcot knee - or neuropathic arthropathy - presents a considerable challenge to the orthopaedic surgeon. Caused by a combination of sensory, motor and autonomic neuropathy, it was originally described as an arthritic sequelae of neurosyphilis. In today's western orthopaedics it is more often caused by diabetes. A Charcot knee is often symptomatically painful and unstable. Traditional management has usually been conservative or arthrodesis, with limited success. Arthroplasty of a Charcot joint has commonly been avoided at all costs. However, in the right patient, using the right technique, arthroplasty can significantly improve the symptoms of a Charcot joint. This article explores the evidence surrounding the role of arthroplasty in the management of a Charcot knee. Arthroplasty is compared to other forms of treatment and specific patient demographics and surgical techniques are explored in an attempt to define the role of arthroplasty in the management of a Charcot knee

Colorimetric detection of chromium(VI) ions in water using unfolded-fullerene carbon nanoparticles

Water pollution caused by hexavalent chromium (Cr(VI)) ions represents a serious hazard for human health due to the high systemic toxicity and carcinogenic nature of this metal species. The optical sensing of Cr(VI) through specifically engineered nanomaterials has recently emerged as a versatile strategy for the application to easy-to-use and cheap monitoring devices. In this study, a one-pot oxidative method was developed for the cage opening of C60 fullerene and the synthesis of stable suspensions of N-doped carbon dots in water–THF solutions (N-CDs-W-THF). The N-CDs-W-THF selectively showed variations of optical absorbance in the presence of Cr(VI) ions in water through the arising of a distinct absorption band peaking at 550 nm, i.e., in the transparency region of pristine material. Absorbance increased linearly, with the ion concentration in the range 1–100 µM, thus enabling visual and ratiometric determination with a limit of detection (LOD) of 300 nM. Selectivity and possible interference effects were tested over the 11 other most common heavy metal ions. The sensing process occurred without the need for any other reactant or treatment at neutral pH and within 1 min after the addition of chromium ions, both in deionized and in real water sam-ples

Strain balancing of MOVPE InAs/GaAs quantum dots using GaAs0.8P0.2

MOVPE growth of stacked InAs/ GaAs QDs with and without GaAs 0.8 P 0.2 strain balancing layers has been studied. The GaAsP layers reduce the accumulated strain whilst maintaining the electrical characteristics. This should enable closer stacking of QD layers leading to higher gain and improved laser performance

Strain Balancing of Metal-Organic Vapour Phase Epitaxy InAs/GaAs Quantum Dot Lasers

Incorporation of a GaAs0.8P0.2 layer allows strain balancing to be achieved in self-assembled InAs/GaAs quantum dots (QDs) grown by metal organic vapor phase epitaxy. Tuneable wavelength and high density are obtained through growth parameter optimization, with emission at 1.27 μm and QD layer density 3 × 10 10 cm-2. Strain balancing allows close vertical stacking (30 nm) of the QD layers, giving the potential for increased optical gain. Modeling and device characterization indicates minimal degradation in the optical and electrical characteristics unless the phosphorus percentage is increased above 20%. Laser structures are fabricated with a layer separation of 30 nm, demonstrating low temperature lasing with a threshold current density of 100 A/cm2 at 130 K without any facet coating

Charge control in InP/GaInP single quantum dots embedded in Schottky diodes

We demonstrate control by applied electric field of the charge states in single self-assembled InP quantum dots placed in GaInP Schottky structures grown by metalorganic vapor phase epitaxy. This has been enabled by growth optimization leading to suppression of formation of large dots uncontrollably accumulating charge. Using bias- and polarization-dependent micro-photoluminescence, we identify the exciton multi-particle states and carry out a systematic study of the neutral exciton state dipole moment and polarizability. This analysis allows for the characterization of the exciton wavefunction properties at the single dot level for this type of quantum dots. Photocurrent measurements allow further characterization of exciton properties by electrical means, opening new possibilities for resonant excitation studies for such system.Comment: 7 pages, 4 figure

Effetto del genotipo e del trattamento antipiralide sulla contaminazione da specie afferenti al clade Gibberella fujikuroi in mais coltivato in Lombardia

Fusarium ear rot (FER) of maize is caused by Fusarium species belonging to Gibberella fujikuroi species complex (GFC) well known as fumonisin (FUM) producers. European corn borer (ECB), the most common maize pest in northern Italy, favors the infection of maize by GFC strains. Since ECB control is not completely effective in lowering fumonisin contamination, additional preventive means, such as increased maize resistance, are required in order to assure a more effective protection. Flavonoids in maize pericarp seem to be able to reduce the fumonisin accumulation. The goal of this study was to assess the effect of flavonoids associated with insecticides on ECB and FER rating under field conditions in Lombardy. Two maize hybrids were sown in 2011 and 2012, one hybrid characterized by the presence of flavonoids in pericarp and the other without pigmentation. The ECB damage incidence, frequency and severity of FER, together with the incidence of GFC strains and FUM in kernels, were assessed in each genotype. In 2012, the ECB control associated with flavonoids presence reduced all the measured parameters except FUM contamination. FUM contamination seemed to be more influenced by the local GFC population and the environment rather than pesticides and pericarp pigmentation

High-powEr Phosphorous-based DFB Lasers for Cold Atom Systems (HELCATS)

No abstract available

Randomized, double-blind comparison of once-weekly dalbavancin versus twice-daily linezolid therapy for the treatment of complicated skin and skin structure infections

Background. Dalbavancin, a novel lipoglycopeptide with a pharmacokinetic profile that allows weekly dosing, is active against gram-positive bacteria, including methicillin-resistant Staphylococcus aureus (MRSA). The efficacy of dalbavancin for treatment of skin and skin structure infections (SSSIs) was demonstrated in a phase 2 study. Methods. In a phase 3 noninferiority study, patients with complicated SSSIs, including infections known or suspected to involve MRSA, were randomized (ratio, 2:1) in a double-blind manner to receive dalbavancin (1000 mg given intravenously on day 1 and 500 mg given intravenously on day 8) or linezolid (600 mg given intravenously or intravenously/orally every 12 h for 14 days). Efficacy was assessed by determining clinical and microbiological responses at the end of therapy and at the test-of-cure visit. Relapses were identified by additional follow-up ~1 month later. Results. MRSA was identified in 51% of patients from whom a pathogen was isolated at baseline. Dalbavancin and linezolid demonstrated comparable clinical efficacy in the clinically evaluable population at the test-of-cure visit (88.9% and 91.2% success, respectively). The rate of clinical success at the end of therapy was >90% in both arms. Less than 1.0% of patients in either treatment arm experienced relapse after the test-of-cure visit. Both treatments yielded successful microbiological response in excess of 85% among microbiologically evaluable patients at end of therapy and at the test-of-cure visit for all pathogens combined, for all S. aureus strains, and for MRSA. Gastrointestinal symptoms were among the most common adverse events in both arms. A higher proportion of patients in the linezolid arm reported adverse events that were judged by the investigator to be probably/possibly related to treatment (dalbavancin arm, 25.4% of subjects; linezolid arm, 32.2% of subjects). Conclusions. Two doses of dalbavancin (1000 mg given on day 1 followed by 500 mg given on day 8) were as well tolerated and as effective as linezolid given twice daily for 14 days for the treatment of patients with complicated SSSI, including those infected with MRSA.Peer reviewe